Case Histories

460 Water Repellent Sealers

[kadence_gallery id=”787″]

470 Crystal-Lok™ & D-Tech™

  • SINGLE COMPONENT CRYSTALLISING SEALER
  • CHEMICALLY REACTS WITH THE CONCRETE
  • TRUE PENETRANT SEALER
  • CLEAR WATER BASED
  • SEALS, HARDENS AND WATER-PROOFS CONCRETE
  • CAN BE USED AS A CURING AGENT AND SEALER IN ONE OPERATION.
  • INCIDENTAL FOOD CONTACT APPROVED
[kadence_gallery id=”792″]

510A Aluminized Urethane Primer

  • HARD, ABRASIVE RESISTANT AND FLEXIBLE
  • OUTSTANDING ADHESION TO STEEL, FIBERGLASS, GALVANIZED, ALUMINUM, TIGHTLY ADHERES TO OLD PAINT
  • WILL NOT SOFTEN SOLVENT SENSITIVE COATINGS, ALKYDS, VINYLS, ACRYLICS
  • GOOD RESISTANCE TO MILD ACIDS, ALKALIS AS WELL AS FRESH AND SALT WATER
  • CAN BE APPLIED AT SUB-ZERO TEMPERATURES AS LOW AS -10°C (14°F)
[kadence_gallery id=”811″]

510C/510S Urethane Maintenance Coating & Sealer

510C Urethane Coating Clear
510C Urethane Coating Color
510S Urethane Maintenance Coating Sealer

  • HARD, ABRASIVE RESISTANT AND FLEXIBLE
  • OUTSTANDING ADHESION: CONCRETE, GALVANIZED STEEL, WOOD, URETHANE FOAM, TIGHTLY ADHERES TO OLD PAINT
  • WILL NOT SOFTEN SOLVENT SENSITIVE COATINGS, ALKYDS, VINYLS, ACRYLICS
  • GOOD RESISTANCE TO ACIDS, ALKALIS AS WELL AS FRESH AND SALT WATER
  • CAN BE APPLIED AT SUB-ZERO TEMPERATURES -10°C (14°F)
  • APPROVED BY CANADIAN FOOD INSPECTION AGENCY (CFIA) FOR INCIDENTAL FOOD CONTACT
[kadence_gallery id=”826″]

727 JetSet™ Liner & 727 Im-Kote™ Liner

  • ONE HOUR CURE TIME EVEN AT SUB-ZERO TEMPERATURES
  • HARD, ABRASION RESISTANT SURFACE
  • CHEMICAL RESISTANT
  • COMPLETE ULTRA-VIOLET STABILITY
  • APPROVED BY AGRICULTURE CANADA FOR INCIDENTAL FOOD CONTACT
[kadence_gallery id=”831″]

735 JetSet™ Finish & 735 Im-Kote™ Finish

  • VERY RAPID CURE – RETURN TO SERVICE IN 2 TO 4 HOURS
  • RESISTANCE TO MOST COMMERCIALLY USED CHEMICALS
  • CAN BE APPLIED AT SUB-ZERO SUBSTRATE TEMPERATURES
  • 100% SOLIDS
  • AGRICULTURE CANADA APPROVED FOR INCIDENTAL FOOD CONTACT
[kadence_gallery id=”841″]
[kadence_gallery id=”844″]

850-Strip This!™ Semi-Paste

850 Strip This!™ Semi-Paste
855 Strip This!™ Liquid
856 Strip This!™ Too! Semi-Paste

  • SAFE FOR USE ON WOOD, FIBERGLASS, GLASS, CONCRETE, LIMESTONE AND ALL METALS
  • PH NEUTRAL AND DOES NOT NEED TO BE NEUTRALIZED AFTER USE, PRIOR TO RECOATING
  • WILL CLING TO VERTICAL AND HORIZONTAL SURFACES INCLUDING CEILINGS WITHOUT DRIPPING
  • WILL REMAIN WET MUCH LONGER THAN CONVENTIONAL STRIPPERS ALLOWING IT TO PERFORM MORE EFFECTIVELY
  • CONTAINS NO METHYLENE CHLORIDE, ACIDS OR CAUSTICS
  • MEETS ENVIRONMENT CANADA’S ECO LOGO REQUIREMENTS FOR PAINT STRIPPERS AND MEETS CALIFORNIA’S RULE 66
  • IS AN ABOVE AVERAGE GRAFFITI REMOVER
[kadence_gallery id=”866″]

870 Mold Assassin™

  • NO VOC
  • NO HARMFUL CHEMICALS
  • PERMANENT
  • SAFE ON ALL SURFACES
  • CAN BE RE-APPLIED
  • NO SPECIAL EQUIPMENT OR VENTILATION REQUIRED
  • TO AVOID EXPOSURE DURING APPLICATION CONSULT MSDS UNDER PERSONAL PROTECTION
[kadence_gallery id=”881″]

1115/1120 EBM Roofing Series

1115 EBM Roofing Membrane Base
1120 EBM Roofing Membrane Finish

  • WATER-BASED, NON-TOXIC, LOW ODOUR AND NON-FLAMMABLE
  • ULTRA-VIOLET RESISTANT WITH LOW TEMPERATURE FLEXIBILITY
  • NO PEELING FADING OR CRACKING
  • ELASTOMERIC – EXPANDS AND CONTRACTS WITH TEMPERATURE FLUCTUATIONS
  • BONDS TENACIOUSLY TO BITUMOUS ASPHALTIC AND ROLL ROOFING, URETHANE AND POLYSTYRENE FOAM, CONCRETE, STEEL AND WOOD
  • SAFE, EASY APPLICATION WITH WATER CLEAN-UP
[kadence_gallery id=”881″]