 |
 |
 |  |
TTC Subway Station, Toronto, Ontario
PROBLEM: Deteriorated platforms
needed to be rebuilt with minimal downtime.
SOLUTION: MG-KRETE was used
to rebuild the platform surfaces behind the edge safety tiles.
Zero-shrink and a very hard surface the platforms could be
opened to traffic an hour after the MG-KRETE placement.
|
Toromont Service Bay, London, Ontario
PROBLEM: Excessive wear from
tractor treads was creating an unsafe work environment..
SOLUTION: MG-KRETE overlay
restored the surface and resists the wear.
|
 
Before................. After
Pearson International Airport, Toronto, Ontario
PROBLEM: Chlorides and moisture were causing delamination and cracking in the parking garage column bases.
SOLUTION: MG-KRETE was used to rebuild the columns providing long-term structural repairs as well as chloride and moisture resistance.
|
City of Saskatoon Saskatchewan
PROBLEM: Freeze-thaw action coupled with chloride penetration was causing premature spalling of the city’s sidewalks.
SOLUTION: MG-KRETE was applied as a scratch coat to resurface the sidewalks. Applied very thin, no trip hazard was created and no concrete had to be removed.
|
 
Marina Pier in Sweden
PROBLEM: Salt water combined
with harsh winters was causing the concrete surface of this
pier to spall. Conventional overlay materials that were used
to fix the surface debonded creating a worse problem than
was present originally.
SOLUTION: Mg-Krete, with salt,
water and freeze-thaw resistance, was used to overlay the
entire pier bonding exceptionally well to solve their overlay
and spalling problem. The cool set characteristics of the
Mg-Krete allowed work to progress despite large fluctuations
in temperature while the job was being perfomed.
|
1.2.3.4.5
|
 |
 |
 |
 |
|
 |
 |
 |
 |
The "perfect patch" for concrete repair
and overlay. MG-KRETE lasts much longer and withstands wear and heavy
traffic better than traditional cement-based patch materials. It tenaciously
bonds to the concrete, without shrinkage, creating a surface that
is more impervious to moisture, salt, gas and oils. It requires less
long-term maintenance. MG-Krete sets within one hour, even at sub-zero
temperatures, helping to dramatically cut production downtime.
more...
|
 |
 |
 |
 |
|
|
|
|
Densifies, hardens and seals concrete permanently
from within, becoming an integral part of the matrix, not just a surface
coating. Untreated concrete is porous and susceptible to intrusion
by salts, gases and oil. Treatment with D-Tech provides a permanent
solution with unparalleled resistance to contamination and abrasion,
never wearing off. more...
|
|
|
|
|
|
|
|
|
Meets the most demanding needs for extreme chemical and abrasion resistance, and sets and cures without shrinkage, in about an hour. Imkote offers a family of products with profound cross-linking chemistry, creating, a dense, impermeable surface, highly resistant to corrosive chemicals and extreme physical abuse. .more...
|
|
|
|
|
|
