 |
 |  |  |
City of Windsor Ontario
PROBLEM: Installation of rail
tracks alongside this roadway caused the road to slope the
wrong way.
SOLUTION: MG-KRETE was used
to level the entire concrete road from 3 inches thick at one
side to ¼ inch thick at the other.
|
Tim Hortons, Hamilton, Ontario
PROBLEM: Oil, salt and moisture
were causing spalling of the concrete drive-through pad.
SOLUTION: MG-KRETE was overlayed
to restore the driveway without the need for any concrete
removal.
|
 
Buffalo Bills Stadium, Buffalo, New York
PROBLEM: Aisleways from the concessions
to seating were worn, spalled and experiencing cracking.
SOLUTION: MG-KRETE was used to patch spalling,
repair cracks, and even out trip hazards.
|
 
Gravenhurst Ski Resort, Gravenhurst, Ontario
PROBLEM: Ice and salt combined
with heavy foot traffic was causing surface deterioration
of the concrete steps and walkways.
SOLUTION: MG-KRETE overlay
restored the surface and provides long-term protection against
salt and ice with a very durable, abrasion resistant surface.
|
Lasco Steel, Whitby, Ontario
PROBLEM: The heavily abusive environment
in this steel plant was causing concrete failure in their
flooring.
SOLUTION: MG-KRETE was applied to restore
the floor and provide a heavy duty flooring able to withstand
the industrially abusive environment. The contractor finished
the job in one third of the time he had allotted using conventional
floor repair.
|
Powell Barrier, Richmond Hill, Ontario
PROBLEM: Physical abuse as
well as environmental contaminants were damaging these highway
dividers.
SOLUTION: MG-KRETE repairs
are strong, durable and easy to apply.
|
1.2.3.4.5 |
 |
 |
 |
 |
|
 |
 |
 |
 |
The "perfect patch" for concrete repair
and overlay. MG-KRETE lasts much longer and withstands wear and heavy
traffic better than traditional cement-based patch materials. It tenaciously
bonds to the concrete, without shrinkage, creating a surface that
is more impervious to moisture, salt, gas and oils. It requires less
long-term maintenance. MG-Krete sets within one hour, even at sub-zero
temperatures, helping to dramatically cut production downtime.
more... |
 |
 |
 |
 |
|
|
|
|
Densifies, hardens and seals concrete permanently
from within, becoming an integral part of the matrix, not just a surface
coating. Untreated concrete is porous and susceptible to intrusion
by salts, gases and oil. Treatment with D-Tech provides a permanent
solution with unparalleled resistance to contamination and abrasion,
never wearing off. more...
|
|
|
|
|
|
|
|
|
Meets the most demanding needs for extreme chemical and abrasion resistance, and sets and cures without shrinkage, in about an hour. Imkote offers a family of products with profound cross-linking chemistry, creating, a dense, impermeable surface, highly resistant to corrosive chemicals and extreme physical abuse. .more...
|
|
|
|
|
|
