6254 Skyway Road
PO Box 915
Smithville ON L0R 2A0
Toll Free: 1.888.818.IMCO (4626)
Local: 905.546.5225
Fax: 905.527.0606
info@imcotechnologies.com

Toll Free: 1.888.818.IMCO (4626) 

Facebook YouTube E-mail
Slider Bridge Repair
Imco® Technologies has developed targeted engineered products that are ideally suited to specific application, including bridge repairs.
Slider Airport Runways
MG-KRETE™ lasts much longer and withstands wear and heavy traffic . . . ideally suited for airport runway repairs!
Slider Re-sloping Grades
MG-KRETE™ is very effective when it comes to re-sloping concrete surfaces. You can go as deep as required on one side down to a feather edge on the other.
Slider Transit
MG-KRETE™ sets within one hour, even at sub-zero temperatures, helping to dramatically cut production downtime and return your business to regular service quickly.
Slider Sidewalk Repairs
MG-KRETE™ ¼ inch overlay – adheres to concrete in all weather conditions – return to service in 1 hr.
Slider Permanent Asphalt Repairs
PAR™ Permanent Asphalt Repair is specifically designed and engineered to permanently repair potholes in asphalt in all weather conditions.
Slider Colours
MG-KRETE™ can be colored with iron oxide powdered colors.
Slider Medians, Sidewalks & Traffic Islands
Use MG-KRETE™ as a scratch coat to resurface sidewalks. No concrete needs to be removed with very thin application, resulting in no trip hazard.
Slider Driveways
MG-KRETE™ resists oil, gasoline, salt, UV radiation and water delivering top quality polymer performance at a fraction of the cost of ripping and replacing.
Slider Steps
MG-KRETE™ stair repairs - No forms required for rebuild.
Slider Strip This!™
Strip This!™ is an excellent graffiti remover. Removes latex, oil based enamels, epoxy, coal tar epoxy, urethanes, polyurethane, shellac, varnish, lacquers & more!

 

Imco® Technologies Inc.

IMCO® products are uniquely formulated to extend the life of concrete … in the toughest of environments and under the harshest conditions.

At IMCO®, our products are created with one goal in mind: To vastly improve the performance of concrete across a broad range of applications.IMCO®’s most widely used products were developed to help solve reoccurring concrete maintenance problems, where conventional products had repeatedly failed. “There is a better way”.

IMCO®’s “concrete solution systems” have been proven to work not just in the lab, but under real field-tested conditions. What’s more, we achieve the goals more cost effectively and with lower ongoing maintenance costs than conventional products.

 

MG-KRETE™

MG-KRETE™

The "perfect patch" for concrete repair and overlay. MG-KRETE™ lasts much longer and withstands wear and heavy traffic better than traditional cement-based patch materials. It tenaciously bonds to the concrete, without shrinkage, creating a surface that is more impervious to moisture, salt, gas and oils.

MG-KRETE™ Training Manual

MG-KRETE™ Training Manual

MG-KRETE™ Training Manual provides in depth information, usage and installation instructions, as well as setting times. Our training manual also contains guides for preparation, mixing methods and usage during various weather temperatures.

PAR Permanent Asphalt Repair

PAR Permanent Asphalt Repair

PAR is specifically designed and engineered to permanently repair potholes in asphalt in all weather conditions. PAR can also be used to repair holes in concrete, however it is recommended that MG-KRETE® by IMCO® be used for this application.

D-Tech™

D-Tech™

Densifies, hardens and seals concrete permanently from within, becoming an integral part of the matrix, not just a surface coating. Untreated concrete is porous and susceptible to intrusion by salts, gases and oil. Treatment with D-Tech™ provides a permanent solution with unparalleled resistance to contamination and abrasion, never wearing off.

Crystal-Lok™

Crystal-Lok™

Densifies, hardens and seals concrete permanently from within, becoming an integral part of the matrix, not just a surface coating. Untreated concrete is porous and susceptible to intrusion by salts, gases and oil. Treatment with Crystal-Lok™ provides a permanent solution with unparalleled resistance to contamination and abrasion, never wearing off.

850 STRIP THIS!™

850 STRIP THIS!™

850 STRIP THIS!™ will remove latex, oil based enamels, epoxy, coal tar epoxy, urethanes, polyurethane, shellac, varnish, lacquers, elastomeric and clear coats from wood, metal brick, concrete, fibreglass and stone. 850 STRIP THIS!™ is a semi paste paint and varnish remover with a proprietary blend of solvents, waxes and thickening agents.

Find a Distributor

Imco Solutions

PROBLEM:Wind driven rain was penetrating exterior block.

SOLUTION: 460 WATER REPELLENT SEALER was applied to all exterior block effectively stopping moisture penetration.
PROBLEM: Rain and moisture were penetrating exterior block and brick.

SOLUTION: 460 WATER REPELLENT SEALER was applied to all exterior block effectively stopping moisture penetration.
PROBLEM: Moisture penetration was causing concrete degradation as well product spoilage.

SOLUTION: 470 CRYSTAL-LOK was applied to all exposed concrete, rejuvenating, protecting and sealing the concrete from moisture contamination.
PROBLEM: Water, salt, oil and gas coupled with heavy traffic were causing premature spalling of concrete floors.

SOLUTION: 470 CRYSTAL-LOK was applied to all flooring to seal, harden and densify the concrete floors.
PROBLEM: The steel structure, as well as steel polymer holding tanks of this plastic processing plant were rusting from environmental exposure.

SOLUTION: 510A Aluminized Urethane was applied to stop the rusting process and provide long-term protection of all the exposed steel.
PROBLEM: Heavy traffic in addition to exposure to gas, oils, salt and various chemical compounds were causing premature deterioration and causing safety and traffic lines to wear away.

SOLUTION: The entire floor was sealed with the 510S Urethane Sealer and then traffic and safety lines painted in with the 510C Urethane Colour Coat.
PROBLEM: Steel balconies were corroding from exposure to elements.

SOLUTION: Primed directly over the rust with the 510A Aluminized Urethane and finish coated with the 530C Urethane Colour Coat for long-term colour and protection with no fading or UV yellowing.
PROBLEM: Hot hydrochloric acid in these pickling lines was corroding the steel tanks despite a vulcanized rubber lining and three layers of acid brick.

SOLUTION: JETSET 727 Liner was applied directly over the acid brick providing a monolithic acid resistant surface.
PROBLEM: Sulfuric acid corrosion had deteriorated the floor and machine bases in this acid production plant.

SOLUTION: JETSET was used to rebuild machine bases as well as overcoat the entire floor area to provide long-term protection in this harsh industrial environment.
PROBLEM: A heavy duty chemical resistant coating was required to protect the concrete and infrastructure as part of this secondary containment area.

SOLUTION: JESTET 735 Finish Coat was applied to the floor area as well as 8 inches up all bases within the containment area for long-term protection and aesthetic finish.
PROBLEM: Excessive humidity from the ice surface was migrating through block walls and causing painted surfaces to blister and peel at these two arenas.

SOLUTION: EBM was applied to interior and exterior block walls eliminating bulk water migration while allowing the building to breathe. The EBM also provided an aesthetic finish that resists blistering and peeling.
PROBLEM: Normal weathering was causing the steel deck roof to corrode and leak..

SOLUTION: Rust spots were coated with 510A Aluminized Urethane to stop the corrosion. The entire surface was then coated with EBM to form a seamless elastomeric membrane that beautified, protected and waterproofed the structure.
PROBLEM: Installation of rail tracks alongside this roadway caused the road to slope the wrong way.

SOLUTION: MG-KRETE was used to level the entire concrete road from 3 inches thick at one side to ¼ inch thick at the other.
PROBLEM: Oil, salt and moisture were causing spalling of the concrete drive-through pad.

SOLUTION: MG-KRETE was overlayed to restore the driveway without the need for any concrete removal.